This blog has been moved, please update the links. This adress will not be maintained anymore.
The new adress:
http://livingprimitively.com/
Thursday, 6 September 2007
Sunday, 2 September 2007
Just for a few days
I'm migrating the blog to wordpress and it's own domain. To not lose any comments I'll disable the comments for a few days and not post again until the new domain is up and running with the blog.
There will also be some changes in regards to the goal of the blog itself. From strictly displaying skills, I'll focus more on the experience of it all, in an attempt to catch the interest of more readers. Not that I'm not satisfied with the primitive skills nerds that already read this blog... :-D
Regards
Torjus
There will also be some changes in regards to the goal of the blog itself. From strictly displaying skills, I'll focus more on the experience of it all, in an attempt to catch the interest of more readers. Not that I'm not satisfied with the primitive skills nerds that already read this blog... :-D
Regards
Torjus
Saturday, 1 September 2007
Another Bone Knife
Bone knives are excellent for tasks requiring a more sturdy edge than stone normally is. For example, while cutting true tinder fungus with a stone is a pain, shaving it off with bone is easy. Bone is also sharp enough for cutting non-fibrous vegetables, gutting fish and skinning small animals. In the latter task bone has the advantage of not normally being sharp enough to slice through the skin, especially if you have a rounded tip on the knife. Though I prefer to work with fresh bones I have been in short supply of bones for a long time since last hunting season so in this case I had to use an old sheep leg bone I found in a field.
Start by sawing halfway into the bone at the lower end margin of where the blade is supposed to be.
Score around the sides and top so that the front piece is freed from the rest without cracking the rest of the piece. Score almost all the way through. Using water will help a lot.
Split from the top and break off the waste. This waste piece was made into a small chisel. It might not be of very great utility, but I'll try it on green wood.
Afterwards the blade was ground thinner and pointy. For cleaning fish I would ideally want a thinner tip, but I want a stronger edge on this one for broader application.
I already had a birch bark sheath from a now broken knife to reuse.
Start by sawing halfway into the bone at the lower end margin of where the blade is supposed to be.
Score around the sides and top so that the front piece is freed from the rest without cracking the rest of the piece. Score almost all the way through. Using water will help a lot.
Split from the top and break off the waste. This waste piece was made into a small chisel. It might not be of very great utility, but I'll try it on green wood.
Afterwards the blade was ground thinner and pointy. For cleaning fish I would ideally want a thinner tip, but I want a stronger edge on this one for broader application.
I already had a birch bark sheath from a now broken knife to reuse.
Subscribe to:
Posts (Atom)